Small Precison Worm Decrease Gearboxes
There are a variety of specifications you will need to consider when making a worm gearbox selection.
First, what is the insight and output torque requirements? Next, check vendor horsepower/torque charts and select the correct worm equipment reducer.
If the size of the gearbox will likely be an important consideration after that check the reducer dimension specifications, not all manufacturers make compact units. Actually, working with the proper supplier can help you not only find the right gear reducer but also prevent some of the most common errors in reducer selection. We offer a free guide to help you find the right supplier to work with.
For low and fractional horsepower application we offer two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output are the major variations between these two models. Both feature the hollow or solid result shaft. Both models are compact and offer users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your unique application or project is essential to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes on top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is necessary. This right angle gear motor is so versatile it could work just about anyplace.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built exclusive, high precision mini gearboxes that cannot be found anywhere else. Our miniature gearboxes are available in numerous configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide customized micro gearboxes that were created and created to meet your unique specifications.
Contact us for the mini gearbox your application requires, or demand a quote upon a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, acceleration reducers, equipment drives, and gearmotors. All conditions can be used more or less interchangeably. Please note that the links for our little gear drives include info on the full range of body sizes for that series or style.
Bevel Box Micro Gear Drive
Our bevel container miniature gear drives are program rated for the the best balance of overall performance and cost. Torque could be balanced to meet your RPM and working life requirements. Light-weight with low backlash functionality (less than 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They provide an result shaft at 90° from the input, and so are available in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminum housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc minutes of backlash or better. Also known as “shaft to bore gearboxes,” these devices provide a single input shaft that protrudes from reverse sides of the housing; output is certainly a keyed bore. Standard one- and double-end shafts are available and given keys and retainer rings. An array of equipment ratios and insight sizes can be found to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and long lasting lubrication. They provide two insight shafts on reverse sides of the framework, with two result shafts perpendicular to the input shafts. Our mini 4 shaft worm equipment drives deliver high performance overall performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes generate an output at 90° from the input. They deliver superior efficiency in an amazing array applications and are built with small footprints, making them perfect for operations where space is limited. They offer high performance with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and so are rated for speeds up to 3,000 RPM. Light weight aluminum housings and stainless steel gears and shafts make these inline spur gearboxes challenging and corrosion resistant, for your the majority of demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm equipment reducers deliver excellent performance with high efficiency, and feature rugged construction for challenging power transfer operations. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are designed in extremely compact footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a customized miniature gearbox to meet up your unique specifications. We can produce custom micro gearboxes in any configuration your application requires, with output torque amounts as high as 900Nm. We are able to work from your gearbox designs, reverse engineer a preexisting unit, or assist you to develop an all-new design that delivers the performance you need. Demand a quote on a customized miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and output shafts with drive essential and retainer rings can be supplied to your specifications for any of our hollow bore miniature gearboxes. We offer a basic selection of one ended or dual ended shafts to assemble in these gearboxes. All gearbox shafts are given keys and retainer bands.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our app engineers to discuss your particular needs.
We offer a broad selection of misalignment shaft couplings in inch and metric bore sizes. ” and metric precision ground shafts are available from stock.
Contact Us for POWERFUL Miniature Gearboxes
We are the miniature gearbox specialists. Our micro gear drive versions deliver superior functionality in a small footprint, and are rugged enough for challenging function environments. E mail us to find out more about our mini gearboxes, or request a quote on a custom made model that is tailored to your preferences.
Additional benefits of worm drive gearboxes include: