Product attribute:
one. Stator size is optional
two. Secure, reliable, low sounds, great starting, lengthy life
three. Powerful electricity
Rated voltage one hundred ten~120V/220~240V-50/60Hz
Typical utilized:
Compact high-performance supporter motor utilized on Refrigerator, Ice Upper body, Condensing plant, Ventilator And so forth
1. Stator measurement: eighty two*25mm
two. Velocity: 1750RPM
3. Safe, reliable, reduced sounds, excellent starting, lengthy existence
Machanical parameter:
Voltage(V): a hundred and ten-240
Frequency: 50/60Hz
Present(A): .75
Input Electrical power: 70W
Torque: 100mN. M
Shaft diameter(mm)=four-6mm
Shaft size(mm)=in accordance to customer’s necessity
Pace(r/min)=according to customer’s prerequisite
Recent(A)=in accordance to customer’s requirement
Enter electrical power(W)=in accordance to customer’s need
Design | STATOR Dimension | SHAFE DIA | VOLT | Input Energy | TORQUE (g.cm) | Pace RATED |
YJ8213 | 13mm | 5mm | one hundred ten-240V | 40W | eighty.51mN.m | 1550RPM |
YJ8216 | 16mm | 6mm | one hundred ten-240V | 50W | 85.82mN.m | 1500RPM |
YJ8219 | 19mm | 7mm | 110-240V | 65W | 100mN.m | 1650RPM |
YJ8225 | 25mm | 7mm | a hundred and ten-240V | 70W | 118mN.m | 1750RPM |
YJ8230 | 30mm | 8mm | a hundred and ten-240V | 85W | 150mN.m | 1800RPM |
ABOUT US
Ritscher team was established up in 2006.we constantly emphasis on micro-motors for household electrical appliance and industry equipment since location up.at present we have two professional micro-motor factories in China which severally found in HangCZPT city and HangCZPT metropolis.it has an area of twenty five,000 square meters plants and much more than three hundred personnel, annual output is 3 million pcs and has five million pcs once-a-year creating capability.right after numerous several years improvement,we had constructed a excellent popularity in the marketplace and obtained a lot more and more customers’ trust in the world.
We commenced from shaded pole motors at starting, up to now,our merchandise included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our product are commonly employed for making refrigerators, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, massage equipment and numerous other equipments.
As a realiable good quality warranty,Ritscher has complete R&D departement,QC office,making department,buy department etc. has perfect generating gear like Aluminum diecasting, Zinc diecasting, Sheet steel stamping, CZPT injection molding etc. also examination/ detection gadget like multiplex temp measuring device, performance parameter inspection unit, Phenol peptide resolution pinhole tester,Anechoic place etc.
Endeavoring to give the best product and provider to consumers,we constantly do the most work to turn out to be an fantastic company of micro motors.
Ritscher is always prepared to build sincere company relationship with friends from all above the world.
Welcome contact with us!
Get ritscher ,appreciate modern daily life!
Our company FAQ for you
(1) Q: What kind motors you can supply?
A:For now,we mainly give Kitchen area Hood Motor,DC Motor,Equipment Motor,Admirer Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor and so forth.
(2) Q: Is it attainable to pay a visit to your factory
A: Certain. But you should kindly hold us posted a number of days in advance. We need to check out our
schedule to see if we are CZPT then.
(three) Q: Can I get some samples
A: It is dependent. If only a number of samples for private use or substitution, I am afraid it will
be tough for us to offer, due to the fact all of our motors are custom produced and no stock
CZPT if there is no further needs. If just sample tests prior to the official purchase and
our MOQ, price and other terms are appropriate, we’d enjoy to provide samples.
(four) Q: Is there a MOQ for your motors?
A: Indeed. The MOQ is among 1000~10,000pcs for different models after sample acceptance.
But it really is also all right for us to accept more compact plenty like a number of dozens, hundreds or hundreds
For the preliminary 3 orders following sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the amount is adequate in case any modifications essential right after first testing.