servo gear reducer

3 Backlash Levels, as low as 3 arc-min
IP65 environment protection
Motor adaptors for just about any servo electric motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next generation cycloidal quickness reducer. It utilizes 52100 grade bearing metal on all of its speed reduction components. It really is offered with a complete two year guarantee, not limited by hours of procedure, and is able to endure abuse that could break one’s teeth of ordinary rate reducers.
The EP 3000, easily available with inputs for both servo and induction motors, includes a compact style with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Offered in two backlash rankings and multiple mounting choices, the EP 3000 includes a design tough enough for both servo and standard induction engine applications. The initial two piece pin housing design guarantees output shaft backlash ratings of significantly less than 6 arc-min.
The EP offers a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows a credit card applicatoin to reach negligible backlash, maintain outstanding rigidity, and increase control stability to ensure that the required output motion can be easily achieved. The look is truly a distinctive concept, utilizing a full get in touch with screw-like tranny for high effectiveness and elimination of use. The unit provides maximum compactness using orthogonal axes and includes a large hollow shaft for flexibility.

Wide range of servo gearboxes, made to fit virtually all servo motors found on the market
Designed for the highest torsional stiffness and the lowest angular backlash, for the maximum torque and overhung loads
Bush with slot machine games and hub clamp for servomotor coupling
Enhanced dimensional compactness because of direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The right technical solution thanks to a comprehensive range of sizes, gear stages, transmission ratios, designs and nonstandard designs.
Servo gear reducers (worm, coaxial, helical and bevel helical models) Catalog SR
Operating instructions:
Operating instructions for equipment reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the expansion of our selection of Servo Reducers, today offering five levels of precision to meet up any program requirements. The five levels of precision offered allows a machine designer to select the mandatory reducer precision to meet up their needs and their spending budget. They are available in both in-line and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Common applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, E and B versions are identical, which makes it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of motor couplings and installation flanges are available for the entire reducer range to mount virtually any servo electric motor and the hollow bore output can be utilized to attach output shafts, pinion shafts, or other drive elements.
These reducers are usually selected predicated on the peak cycle forces, which often happen during accelerations and decelerations. These routine forces depend on the driven load, the rate vs. time profile for the routine, and any other exterior forces acting on the axis. For more selection information, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. Your application information will be reviewed by our engineers, who will recommend the best solution for your application.
EP Inc. provides a full range of modular servo gearboxes /worm reducers. The modular style permits configurations with motor input flange and output pinion for rack and pinion drives, along with solid output shafts, Hollow bore output, and insight shafts for all the positioning applications. The modular design allows for universal mounting of the gearbox in virtually any orientation.
They can be utilized on motors with a NEMA23 standard flange via an adaptor package. As the gears are normally angled, they result in a short total amount of the engine and its gear.
The series may also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole can also be constructed on the gear’s output side.
Built with a simple and robust design, the series offers gearing ratios that range between 6:1 to 75:1. The user may also customize the components through the order, in order to match the apparatus to its intended program.
The Precision Planetary Gears of the EPRG series contains a thorough range of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models likewise incorporate versions with dual shaft, right angle shaft and right angle output, in addition to a full selection of adapters for engine mounting, making them with the capacity of meeting the requirements of even the most different applications. They are created for use with built-in servo and stepper EP motors, mounted directly or via adaptor flanges, but may also be used with other EP engine types. This selection of products is founded on years of experience and represents the end result of a decade-long analysis aimed at improving performance.
Optimum precision and dynamics, combined with remarkable torque density, are the key requirements specific for reliable servo gearboxes used. EP provides servo gearboxes for any app and any efficiency range. Our low-backlash planetary and right-angle gearboxes reflect our interest for creativity and the best levels of precision.
Worm equipment reducers provide market advance solution with efficiency and flexibility. Low amount of basic models could be applied to a wide range of power ratings guaranteeing best performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are made for high-performance mechanical gear. When the motor acceleration must be reduced, the result torque boosts and send torque completely to the application form. We believe that clients will appreciate our gear reducer to attain their demand. Just visit EP, you can get more information about servo gearheads, servo gearboxes, and gear reducers. We continue to keep in the years ahead for your support.
Plug the Speed Reducer into the desired channel of your receiver, and plug the business lead from your servo (or servo wye) in to the male servo lead from the circuit plank. The set screw on the blue trim pot, located near the top of the main circuit board, can be used to control the swiftness of the servo. Convert the set screw completely clockwise (CW) for regular servo speed without speed reduction, fully counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial swiftness reduction. The reddish LED indicates three feasible conditions: Gradual Blinking = No Transmission; Solid On = No Swiftness Reduction; Fast Blinking = Reduced Swiftness Setting
Please note that in the event that you make any change to the speed establishing as the receiver is on, you must cycle capacity to the receiver (switch if off and back on) for the new speed establishing to take impact. This circuit may also be used in conjunction with this Servo Reverser to cause flap or retract servos to carefully turn in opposing directions for right function. Guidelines are included for easy set up and use.
IMPORTANT NOTE: This product will only work on a normal, proportional servo. You won’t focus on a retract-type servo, as they do not recognize any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, actually by a transmitter that includes this function, as their design and electronics don’t allow it. Verify the FAQ page to learn more.
This device will reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you intend to control for a far more scale-like motion of flaps or retracts. Adjustable, it can be set to lessen the quickness of your servo from super-slow motion to no speed decrease at all, with an nearly infinite quantity of positions among. Maximum reduction time for a servo to travel 90 degrees is about 14 seconds, minimum time (no reduction) is merely the normal swiftness of the servo. Ideal for reducing or removing the inclination of a plane to “balloon up” when flaps are deployed. It can be utilized to control more than one servo by use of a regular servo Y.
This is the new regulated version that can be used on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH electric batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Lifestyle batteries. This unit will NOT reduce the voltage going to your servos.
The EP Gear Reducer may be the perfect solution for servomotor applications such as packaging machines, gantries, injection molding devices, pick and place, and linear slides.Provided in concentric shaft, right position solid shaft, and correct angle hollow shaft designs with modular adaptor flanges and keyless compressible bushings to very easily mount to any kind of manufacturer’s servo motor. The EP Series helical gears have got slanted teeth compared to spur gears with directly cut teeth, making a smoother gear mesh, yielding considerably lower noise levels.
The low backlash EP planetary servo gear units are designed for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the greatest possible versatility and cost-efficiency because not every application requires high-performance parts.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo gear units can be found in the following versions:
PSC = B5 output, even output shaft
PSKC = B5 output, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway

View our on-line servo gear reducer gallery.


Recent Posts

worm drive motor

As one of leading worm drive motor manufacturers, suppliers and exporters of mechanical products, We offer worm drive motor and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of worm reducer