Whenever a roller chain is employed, shaft positions may be arbitrarily established. On the other hand, in principle, adhere to the illustration shown below. That is, in case the chain is tensioned horizontally, retain the top tensioned. Keep away from vertical transmission when attainable. In an inevitable case, location the 
massive sprocket in the bottom regardless from the route of rotation.
Once the chain layout is undesirable:
?Once the prime is sagging as well as sprocket center distance is quick:
As illustrated under, adjust the sprocket center distance shaft to eradicate the sag.
?When the major is sagging as well as sprocket center distance is long:
As illustrated beneath, install an idler from within to eliminate the sag.
?Once the chain is vertical or inclined:
Do away with the extra sag by a tensioner. In this case, a tensioner that automatically eliminates the sag offers greater benefits.
Whenever a pulsating load acts in large pace operation:
The chain’s vibration and also the load influence frequency or chordal action may synchronize to amplify vibration about the chain. Because vibration influences the chain, consider countermeasures to avoid vibration while in the following measures:
?Transform the chain pace.
?Increase chain stress. On the other hand, note that over-
tensioning can shorten the existence of your chain. ?Use an idler or tensioner to divide the span
?Set up a manual stopper to avoid vibration.
Note: Chordal action refers to the vertical movement of chain induced when it really is engaged with sprockets.
Layout of chain place
Tags